CLEANING AGENTS Specific cleaning agents prevent early aging of the resin pressure casting moulds. Our low-hazardous cleaning agents have good wetting properties to loosen deposits, and excellent complexing properties, which allow the rinsing out of multivalent cations. The cleaning agents can either be used for cleaning the mould pores and capillaries, or for cleaning the mould surface. CLEANING AGENTS Overview PLASTER ADDITIVES On account of their surface activity, plaster additives act as deflocculants, which means: the solids content in the plaster slurry can be increased whilst maintaining the same processing consistency. This intensification of the plaster/water ratio brings about an augmentation of the mechanical resistance, which particularly becomes obvious as an improved abrasion resistance. In turn, this can lead to a prolonged working life of the plaster mould. PLASTER ADDITIVES Overview RELEASE AGENTS Release agents bring about good separation of the plaster negative cast from the master mould. Owing to the water-soluble emulsion system, the absorption capacity of the plaster moulds will be unaffected.
Specific cleaning agents prevent early aging of the resin pressure casting moulds. Our low-hazardous cleaning agents have good wetting properties to loosen deposits, and excellent complexing properties, which allow the rinsing out of multivalent cations. The cleaning agents can either be used for cleaning the mould pores and capillaries, or for cleaning the mould surface. On account of their surface activity, plaster additives act as deflocculants, which means: the solids content in the plaster slurry can be increased whilst maintaining the same processing consistency. This intensification of the plaster/water ratio brings about an augmentation of the mechanical resistance, which particularly becomes obvious as an improved abrasion resistance. In turn, this can lead to a prolonged working life of the plaster mould.CLEANING AGENTSPLASTER ADDITIVES
